ASME B16.9: End Caps

1. Technical Drawings of End Caps(ASME B16.9)

2. Dimensions of End Caps(ASME B16.9)

NPS	Outside Diameter	Length, E	Limiting W.T for Length E	Length, E1
NPS	Outside Diameter	Length, E	Limiting W.T for Length E	Length, E1
1/2	21.3	25	4.57	25
3/4	26.7	25	3.81	25
1	33.4	38	4.57	38
1 1/4	42.2	38	4.83	38
1 1/2	48.3	38	5.08	38
2	60.3	38	5.59	44
2 1/2	73.0	38	7.11	51
3	88.9	51	7.62	64
3 1/2	101.6	64	8.13	76
4	114.3	64	8.64	76
5	141.3	76	9.65	89
6	168.3	89	10.92	102
8	219.1	102	12.70	127
10	273.0	127	12.70	152
12	323.8	152	12.70	178
14	355.6	165	12.70	191
16	406.4	178	12.70	203
18	457	203	12.70	229
20	508	229	12.70	254
22	559	254	12.70	254
24	610	267	12.70	305
26	660	267	-	-
28	711	267	-	-
30	762	267	-	-
32	813	267	-	-
34	864	267	-	-
36	914	267	-	-
38	965	305	-	-
40	1016	305	-	-
42	1067	305	-	-
44	1118	343	-	-
46	1168	343	-	-
48	1219	343	-	-

*All dimensions are in mm unit.

*Click to view the selection of materials for butt weld pipe fittings.

*Tolerances of dimensions are in conformance with ASME B16.9
*The shape of caps shall be ellipsoidal in conformance to ASME piping Code.
*Length E applies for W.T not exceeding the value given in the 4th column.
*Length E1 applies for W.T greater than that given in the 4th column for 24" and smaller.
For 26" and larger, length E1 can be applied under buyer's approval.

*Related products:

ASME B16.9 Buttwelding Pipe Fittings
Stub End	End Cap	Reducer 01	Reducer 02

Views: Author：hbmetals Date:15/04/23